FXCalc is an accurate formula scientific calculator with a modern look.
Enter a mathematical expression and use the equals button to evaluate it, carrying out calculations in sequence determined by common mathematics order of operations.
Note: The In-App purchase permission is for buying advanced optional features in the future, to support development of this app. The current features and some of the future features will always remain free.
The expressions and their results are stored in the calculation history. To go back and forward in history, use the up and down arrow buttons.
To start editing the displayed formula, use the left or right arrow button. When editing a formula, use these buttons or tap anywhere within the formula to move the caret.
To clear the current formula, use the AC button. When viewing a formula, you can also just start entering a new expression without clearing the old one.
To switch between the insert and replace modes, use the INS toggle button.
The calculation results can be displayed in different formats.
To display results in normal (fixed point) notation, use either Nor1, Nor2, or Fix buttons.
To display results in scientific (exponential) notation, use either Sci or Eng buttons.
To adjust the number of digits to display, long-press the button (except Nor2) then use the slider.
The angles (e.g. for trigonometric functions) can be expressed in either Degrees, Radians or Grads. To cycle between angle units, use the DRG button.
To access the hyperbolic and inverse trigonometric functions, use the hyp and inv toggle buttons.
Currently, two variables are available to use, additional variables will be added later.
The answer variable (Ans) is a special variable that contains the result of the last successful calculation. To recall it's value, use the Ans button.
The memory variable (M) is a general purpose variable with dedicated buttons
To set, recall and clear (set to zero) the memory variable, use the MS, MR and MC buttons.
To increase or decrease the value of the memory variable by the current value, use the M+ and M- buttons.
The display precision is limited to at most 12 decimal digits, the decimal exponent range is limited to [-99; 99].
Internally, the calculator uses IEEE 754 double precision floating point arithmetic, allowing representation of numbers with a decimal exponent range of [-308; 308] with 15–17 decimal digits precision.
Bug reports, feature requests and other suggestions are welcome. Don't hesitate to contact me.
If you'd like to test the latest features early, join the beta program:
https://play.google.com/apps/testing/com.razorscript.FXCalc
FXCalc هو دقيقة صيغة آلة حاسبة علمية مع نظرة حديثة.
أدخل تعبير رياضي واستخدام زر متساوين لتقييمها، وإجراء العمليات الحسابية في تسلسل التي يحددها النظام الرياضيات المشترك للعمليات.
ملاحظة: شراء إذن داخل التطبيق هو لشراء الميزات الاختيارية المتقدمة في المستقبل، لدعم تطوير هذا التطبيق. وميزات الحالية وبعض ملامح المستقبل تبقى دائما حرة.
يتم تخزين تعبيرات ونتائجها في حساب التاريخ. لنعود وإلى الأمام في التاريخ، واستخدام أعلى وأسفل مفاتيح الأسهم.
لبدء تحرير صيغة عرض، استخدم زر السهم الأيسر أو الأيمن. عند تحرير صيغة، استخدم هذه الأزرار أو انقر في أي مكان داخل صيغة لنقل الإقحام.
لمسح الصيغة الحالية، استخدم زر AC. عند عرض الصيغة، يمكنك أيضا مجرد البدء في إدخال تعبير جديد دون مسح القديم.
للتبديل بين إدراج واستبدال وسائط، استخدم زر تبديل INS.
نتائج حساب يمكن عرضها في أشكال مختلفة.
لعرض النتائج في العادي (نقطة ثابتة) تدوين، استخدم Nor1، Nor2، أو إصلاح أزرار.
لعرض النتائج في العلمية (الأسي) تدوين، استخدم الخيال العلمي أو المهندس أزرار.
لضبط عدد من الأرقام إلى عرض، اضغط طويلة على زر (باستثناء Nor2) ثم استخدم شريط التمرير.
زوايا (على سبيل المثال عن الدوال المثلثية) يمكن التعبير عنها إما الدرجات، راديان أو صواريخ غراد. لدورة بين وحدات زاوية، استخدم زر DRG.
للوصول إلى الدوال المثلثية القطعي وعكسية، استخدم HYP والجرد أزرار تبديل.
حاليا، هما المتغيرات المتاحة للاستخدام، وستضاف متغيرات إضافية في وقت لاحق.
المتغير الجواب (الجواب) هو متغير خاص يحتوي على نتيجة الحساب الناجح الماضي. لنتذكر انها قيمة، استخدم زر الجواب.
المتغير الذاكرة (M) هو المتغير للأغراض العامة مع أزرار مخصصة
لتعيين، استدعاء واضحة (مجموعة إلى الصفر) متغير الذاكرة، استخدام MS، MR ومولودية أزرار.
لزيادة أو خفض قيمة المتغير الذاكرة عن طريق القيمة الحالية، استخدم M + وM- أزرار.
يقتصر العرض الدقة لفي معظم 12 أرقام عشرية، ومدى العشرية الأس تقتصر على [-99. 99].
داخليا، تستخدم آلة حاسبة IEEE 754 الدقة المزدوجة النقطة العائمة حسابي، مما يتيح تمثيل الأرقام مع مجموعة الأس العشري [-308. 308] مع 15-17 الأرقام العشرية الدقة.
التقارير الشوائب، طلبات جديدة واقتراحات أخرى هي موضع ترحيب. لا تتردد في الاتصال بي.
إذا كنت ترغب في اختبار أحدث الميزات في وقت مبكر، والانضمام إلى برنامج بيتا:
https://play.google.com/apps/testing/com.razorscript.FXCalc